Message; Speakerphone; Speed Dial; Using The Speed Dial Screen - Avaya 2410 End User Manual

To retrieve a message:
1. Press to retrieve your messages, and follow the prompts.
Note: Certain features must be programmed by your system manager to activate the Message button. Please see your system
manager if the Message button is not working properly.
To make or answer a call without lifting the handset, or to use the speakerphone with any feature:
1. Press .
2. Make or answer the call, or access the selected feature.
3. Adjust speakerphone volume if necessary.
Note: If you want to make the speakerphone volume louder, you can disable the speakerphone ACG by setting
"Speaker AGC Enabled" to "No" in the second page of the Options screen. When enabled, speakerphone AGC
automatically adjusts volume levels by increasing low signals and decreasing high signals. If you disable the
speakerphone AGC, low volume levels will not be increased automatically.
To use the Group Listen feature (if administered) in which the handset (or headset) and the speaker are active at the same
time:
1. While you are active on the handset (or headset), press
To change from the headset to the speakerphone:
1. Press .
To change from the handset to the speakerphone:
1. Press .
2. Hang up the handset.
To change from the speaker to the handset:
1. Pick up the handset and talk.
To end a speakerphone call:
1. Press again.
Using the Speed Dial screen, you can store up to 48 speed dial entries in the personal directory of your telephone. You can
access this screen by pressing the SpDial softkey at the Home screen. (You may have to press any one of the softkeys to display
the softkey labels.)
Note: The personal directory containing your speed dial entries of numbers you call frequently is stored in your telephone. The
personal directory is separate from the Directory feature, which resides on the call processing system. The Directory feature,
which is administered by your system manager, allows any call processing system user to search for the extension of another
user in the call processing system directory.
When you have created a speed dial list, the Speed Dial screen displays the saved entries in alphabetical order. A single page
displays six entries. You can make a call directly from this screen by pressing the button associated with a displayed entry.
The figure below shows a sample Speed Dial screen.

Message

Speakerphone

.

Speed Dial

Using the Speed Dial Screen

2410 Digital Telephone End User Guide | 15 | P a g e