Upgrade Bay - HP EliteBook 8460w Maintenance And Service Manual

Upgrade bay

Description
Upgrade Bay – Hard Drive Adapter Kit
500-GB, 7200-rpm (for use in the upgrade bay)
320-GB, 7200-rpm Self-Encrypting Drive (SED) hard drive
Before removing a drive from the upgrade bay, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom door (see
Remove the drive from the upgrade bay:
1. Position the computer upside-down with the right side toward you.
2. Remove the four Phillips PM2.0×4.0 screws that secure the drive assembly into the upgrade
bay.
3. Loosen the captive Phillips screw that secures the drive in the bay (1).
4. Push the drive tab (2) to release the drive from the computer.
74 Chapter 4 Removal and replacement procedures
Battery on page 63).
Bottom door on page 70).
Spare part number
643921-001
656424-001
626978-001