Buick Rendezvous 2003 Owner's Manual page 341

{
CAUTION:
Fans or other moving engine parts can injure
you badly. Keep your hands away from moving
parts once the engine is running.
5. Check that the jumper cables don't have loose or
missing insulation. If they do, you could get a
shock. The vehicles could be damaged too.
Before you connect the cables, here are some
basic things you should know. Positive (+) will go to
positive (+) or to a remote positive (+) terminal if
the vehicle has one. Negative ( ) will go to a heavy,
unpainted metal engine part or to a remote
negative ( ) terminal if the vehicle has one.
Don't connect positive (+) to negative ( ) or you'll
get a short that would damage the battery and
maybe other parts too. And don't connect the
negative ( ) cable to the negative ( ) terminal on
the dead battery because this can cause sparks.
6. Connect the red positive (+) cable to the positive (+)
terminal of the dead battery. Use a remote
positive (+) terminal if the vehicle has one.
7. Don't let the other end
touch metal. Connect it
to the positive (+)
terminal of the good
battery. Use a remote
positive (+) terminal
if the vehicle has one.
8. Now connect the black
negative ( ) cable to
the negative ( )
terminal of the good
battery. Use a remote
negative ( ) terminal
if the vehicle has one.
5-41