Table of Contents
Advertisement
Viewer Setup
Switches the Operation Menu to the Viewer Setup
Menu.
Click this button when you want to configure the
settings of [Unicast], [On Screen Display] and
[Other].
(A P61 [[Unicast] Settings] )
(A P62 [[On Screen Display] Settings] )
(A P63 [[Other] Settings] )
Stop/Play
Pauses or plays back images.
Capture
Captures and saves the currently displayed image
in your computer. The image is recorded as a JPEG
file in the folder that is created under the
[Document] folder of the computer. The default
folder name is "model name". The file name shows
the year, month, days, hours, minutes, seconds,
and milliseconds.
Memo :
You can rename the folder in the [Other]
0
settings.
(A P63 [[Other] Settings] )
Note :
The clock time of this file name is the clock time
0
of the computer. Note that it is not the "Time" of
the camera.
You cannot save images as motion images.
0
You cannot save H.264 images.
0
Protocol
Selects a protocol to be used when the viewer
acquires data from the camera.
Only "HTTP(Unicast)" can be selected.
HTTP(Unicast):
0
Allows monitoring the camera with a single
viewer. If a packet is lost, the packet data is
transmitted again and recovered.
Encoder
Select the stream when the protocol is
"HTTP(Unicast)".
[Set values: RNo.1, No.2, No.3]
Compression format and Framesize
Displays the stream type and the resolution.
Memo :
When [Framesize] is set to "1920´1080", the
0
frame size of the Built-in Viewer may be
displayed as "1920´1088", and the video image
may appear disrupted at the top.
Built-in Viewer Screen Configuration
54
Display Size
Sets a display size of image area.
Fixed:
0
Sets the image display size to the same as the
preset frame size. For frame size setting, see
[Encoding] page of [Advanced Settings].
(A P37 [[Encoding] Page] )
Variable:
0
Displays images according to the Web
browser's window size.
[Set values: RFixed, Variable]
Memo :
The window size of the Web browser does not
0
change even if you select the "Fixed" or
"Variable" display size.
Advanced Settings
Opens the Settings page. The display page varies
depending on the access authorization of the user.
admin: [Basic Setting1] Page
0
operator: [Basic Setting2] Page
0
user: [Miscellaneous] Page
0
(A P29 [How to Open the Settings Page] )
Advertisement
Table of Contents
