Table of Contents
Advertisement
Note :
Do not peel off the protective sheet which is
0
attached at shipment, until the dome cover is
mounted on the main unit.
Ceiling mount section
Terminal
H
I
J
K
H
Reverse side
.
H Fixing holes (x3)
This hole is for mounting the ceiling clamping
bracket to the ceiling or the ceiling recessed
bracket (WB-S685U: Sold separately).
I [AC24VHINPUT] AC 24 V input terminal
For connecting to AC 24 V power.
(A P20 [Connect the power cable.] )
J [10BASE-T/100BASE-TX] LAN cable
connection terminal
L
For connecting the unit to the network.
It supports PoE Plus (IEEE802.3at Type 2) and
enables you to use this camera without having
to connect to a power supply using a power
cord.
M
(A P20 [Connect the LAN cable.] )
K Alarm Input/Alarm Output terminal (x8)
This cable is for alarm input and alarm output.
N
(A P14 [Alarm Input/Output Signal] )
(A P21 [Connect the alarm signal cable to the
alarm signal terminal.] )
List of Alarm Pin Numbers
Pin Number
1
2
3
4
5
6
7
8
L Fall prevention wire mounting hole
Mount a fall-prevention wire (sold separately)
from the ceiling slab or channel to this hole to
prevent the camera from falling.
O
M Wire clamp fixing hole
This is used to bundle wires.
N Fall prevention wire fixing bracket
This is for attaching the "fall prevention wire D"
of the camera.
(A P12 [Fall prevention wire] )
O Camera connection terminal (female)
For connecting to the connection terminal
(male) of the camera.
Signal Name
INPUT1
INPUT1 COM
INPUT2
INPUT2 COM
OUTPUT1
OUTPUT1 COM
OUTPUT2
OUTPUT2 COM
Name of Parts
13
Advertisement
Table of Contents
