Table of Contents
Advertisement
Max. Interval
This is available when both [1st Trigger] and [2nd
Trigger] are set.
Specify the maximum interval between each
trigger for [1st Trigger] and [2nd Trigger].
An action will be performed if [2nd Trigger] occurs
within the maximum time interval after [1st
Trigger] occurs.
[Set values: 1 sec to 3600 sec]
2nd Trigger
Select the 2nd trigger to perform an action.
[Set values: RDisable, Pin Input1 Make, Pin Input2
Make, Pin Input1 Break, Pin Input2 Break]
TCP
TCP IP Address:
0
Enter the IP address or FQDN of the destination
of TCP notification.
TCP Port Number:
0
Enter the port number of the destination of TCP
notification. (1 to 65535)
TCP Data:
0
Enter a character string to be sent for TCP
notification. Input not more than 127 characters.
JPEG Attachment:
0
Specify whether or not to attach an image file to
the mail. To attach JPEG images, check the
Attach box and select the transmission channel.
Encoder:
0
Specifies an Encoder No. for encoding of
attached JPEG files.
Memo :
You cannot select [JPEG Attachment] if there is
0
no channel with Encode set to JPEG.
UDP
UDP IP Address:
0
Enter the IP address or FQDN of the destination
of UDP notification.
UDP Port Number:
0
Enter the port number of the destination of UDP
notification. (1 to 65535)
UDP Data:
0
Enter a character string to be sent for UDP
notification. Input not more than 127 characters.
Switch Scene File
Scene File:
0
Select the scene file to change. For details of the
scene file, see the [Camera] page.
(A P33 [[Camera] Page] )
[Set values: RGeneral, Indoor, Outdoor,
ActiveGamma, Traffic, DataSaving, Day(Color),
Night(B&W)]
Action Position Number
Set the position number to move to when [Action]
item is set to "Position".
[Set values: 0 to 99]
Pin Output1 Make, Pin Output1 Break, Pin
Output2 Make, Pin Output2 Break
Alarm Output Duration:
0
Specify the output time when the [Action] item is
set to "Pin Output1 Make", "Pin Output1 Break",
Pin Output2 Make, or Pin Output2 Break.
[Set values: 0/100 to 5000] msec
Trigger Position Number
Set the position number to move to when [1st
Trigger] item is set to "Position".
[Set values: 0 to 19]
Time
Executes an action at the time you have entered.
[Set values: 00 H 00 M to 23 H 59 M]
Day/Night
Color:
0
Changes the [Black & White Mode] setting to
"Color".
Black & White:
0
Changes the [Color Mode] setting to "Black &
White".
[Advanced Settings] Page -[Alarm] Page
41
Advertisement
Table of Contents
