Introduction; Unpacking; Connectors/Cabling - Tannoy V8 User Manual

1. Introduction

Featuring a high power 200mm (8") Dual Concentric™ drive unit with Tannoy's unique point source
technology, the Tannoy V8 provides a compact solution for high quality music and speech
reproduction. Installation, in even the smallest of venues, is made simpler due to the 90 degree
conical dispersion of the Dual Concentric™ which allows either vertical or horizontal mounting without
affecting sound quality or compromising performance.
The V8 comprises one 200mm (8") Dual Concentric driver in which the low frequency (LF) and high
frequency (HF) sources are coincidentally aligned to a point source, resulting in a smooth uniform
frequency response over a wide area of coverage either as a portable stand alone system or in a
multi-cabinet array. The sophisticated CAD designed waveguide combines 90 degree conical
dispersion and excellent acoustic impedance characteristics. As the system is a point source,
clusters and arrays have minimal lobing. These features are inherent and achieved without the use of
any electronic signal processing.
The asymmetric cabinet profile allows flexible and discreet installation. As a foreground system,
installation is made simple with a range of Secur-ET mounting hardware, designed specifically for the
V series – or the system can be flown using the integral M10 inserts.
For portable stage use the birch ply cabinet has a recessed carrying handle on the rear of the cabinet
and a blanking plate, which can be removed to install an optional pole mount. As a versatile low
profile stage monitor, the conical coverage pattern gives the performer greater freedom of movement
than allowed by conventional horn loaded designs.
The V8 has been designed for use with the Tannoy TX1 controller, which will equalise the system
resulting in improved bass performance as well as providing a 2-way crossover function, for use with
separate sub-bass systems.

2. Unpacking

Every Tannoy V8 product is carefully tested and inspected before being packaged and leaving the
factory. After unpacking your loudspeaker, please inspect for any exterior physical damage, and save
the carton and any relevant packaging materials in case the loudspeaker again requires packing and
shipping. In the event that damage has been sustained in transit notify your dealer immediately.

3. Connectors/Cabling

The V8 is fitted with 4-pole Neutrik Speakon™ connectors. Speakon has the following advantages
over EP and XLR type connectors: All terminations are solderless; this makes life easier at the time
of installation or when field servicing is required. Contacts will accept 6 sq. mm wire with an outside
diameter of up to 15mm and a current rating of 30 Amps. The pins of the 2 Speakon sockets
identified input/output on the rear of the input panel are paralleled within the enclosure. Tannoy have
adopted the conventional wiring standard for the V8 product :-
For a worldwide list of Neutrik distributors see
Pin 1+ is Positive
Pin 1- is Negative
http://www.neutrik.com/