Secur Et- Vcb2 & Vcb4 - Tannoy V8 User Manual

12.3 SECUR ET- VCB2 & VCB4
VCB2 :-
The VCB2 cluster bar is available in both black and white finishes and provides a platform onto which
2 x Tannoy V8 loudspeakers can be mounted using the V8Y yoke bracket (not supplied in the VCB2
kit). A number of different loudspeaker arrangements can be made depending on the application and
the coverage pattern required (see figures 1 & 2).
Using the VCS ceiling saddle the resulting cluster can be attached to the ceiling, or by using the
VPC pole clamp the cluster can be attached to trussing and a wide variety of structures within the
installation venue.
VCB4 :-
The VCB4 cluster bar (available in both black and white) provides the platform onto which 3—4 x
Tannoy V8 loudspeakers can be mounted using the V8Y yoke bracket (not supplied in the VCB4 kit).
A number of different loudspeaker arrangements can be made depending on the application and the
coverage pattern required (see figures 3—6).
N.B. When using the VCB4 cluster bar system, one of the cluster bars is mounted above the other to
produce a cross formation. To ensure an equal mounting height, the 2 x Tannoy V8 loudspeakers
being flown from the lower cluster bar should be attached to the upper surface of this bar. While the 2
x Tannoy V8 loudspeakers being flown from the upper bar should be attached to the underside of this
cluster bar.
Using the VCS ceiling saddle the resulting cluster can be attached to the ceiling. Or by using the
VPC pole clamp the cluster can be attached to trussing and a wide variety of structures within the
installation venue.
Fig 1.
Fig 2.
Fig 3.
Fig 4.
Fig 5.
Fig 6.