Secur - Et V8Y Yoke Bracket - Tannoy V8 User Manual

12.2 SECUR ET – V8Y Yoke Bracket
The V8Y is a discreet yoke style bracket, available in both black and white, and is used to mount the
Tannoy V8 in both portrait and landscape orientations. The Tannoy V8 loudspeaker is fixed to the
bracket using the M10 bolts and washers supplied in the accessory pack
Only the screws, fasteners, shakeproof and plain washers specified on figure 3. should be
used to assemble the VMY bracket.
The arms of the V8Y have long slots, through which M10 bolts are fitted, and screwed into the
integral M10 inserts in the top and bottom of the Tannoy V8 cabinet.
These slots allow the installer to easily and precisely adjust the distance between the loudspeaker
and the mounting surface for optimal discreet installation of the Tannoy V8.
Use the 20mm hole to pass the loudspeaker cable through before fixing the bracket to the wall.
Use the table of parts along with the assembly drawing to assemble the V8Y.
Assembly View
1
2
3
4
5
6
Description
Yoke Bracket
Washer M10 Plain
Washer M10 Spring
M10 x 20 Button Head Screw
M10 x 30 Button Head Screw
Rubber Friction Washer
Quantity
1
2
2
1
1
2