System Configuration & Oem Controllers - Tannoy V8 User Manual

13 System Configurations & OEM Controllers
With the vast array of digital loudspeaker management systems available it is inevitable that the user
may opt to use a controller other than the TX1 & TDX2 as part of a large scale integrated system. The
V8 has been designed to need no external equalisation to overcome system limitations. If the V8 is
to be used alone with additional bass enhancement required and have the frequency response limits
tighter than +/- 3dB as stated in section 11, then apply the parameters in the table below for
optimised performance:-
Parameter
Gain
Delay
Polarity
HPF
LPF
PEQ 1
PEQ 2
PEQ 3
PEQ 4
PEQ 5
(not used)
Note : When using the V8 with subs, set HPF @ 100 – 130Hz
(24dB/oct LR) and omit PEQ1.
Unit/Name
(dB) User definable
(ms) User definable
Positive
Freq (Hz) 49.6
Slope (dB/oct) 24
Filter Shape Butterworth
Freq (Hz) Thru
Slope (dB/oct) NA
Filter Shape NA
Freq (Hz) 72.9
Level (dB) +5.5
Type Parametric
Q / Bandwidth 2 / 0.5
Freq (Hz) 143
Level (dB) -2
Type Parametric
Q / Bandwidth 2.8 / 0.3536
Freq (Hz) 981
Level (dB) -2
Type Parametric
Q / Bandwidth 4.8 / 0.2102
Freq (Hz) 5040
Level (dB) +3
Type Parametric
Q / Bandwidth 3.6 / 0.2806
Freq (Hz)
Level (dB)
Type
Q / Bandwidth