Secur - Et Veb Eyebolts - Tannoy V8 User Manual

12.4 SECUR ET – VEB Eyebolt
The Tannoy V8 loudspeaker can be flown with high
quality VEB M10 eyebolts with collar to
BS4278:1984.
To install the VEB M10 eyebolts remove the
original M10 counter sunk screws from the
locations you wish to install the VEB M10
eyebolts. Then replace these counter sunk M10
screws with the VEB M10 eyebolts. The M10
insert on the rear of the cabinet also accepts a
VEB M10 eyebolt and should only be used for
tilting the loudspeaker to the desired angle.
FIG 1.
Important: It is imperative for safety reasons
that two eyebolts linked to two independently
fixed straps are used per cabinet. If flying one
cabinet above another, the cabinet must be
used in a landscape orientation. The correct
method is shown in figure 2.
Never attempt to use formed eyebolts i.e.
formed from a steel rod and bent into an eye.
FIG 2.
FIG 2.