Table of Contents
Advertisement
Vax_V-082i.qxd
8/5/06
Storage / Troubleshooting / Uk Service & Help / Technical Specification
7. Storage
The floor head and can be stored using the parking
mount at the back of the appliance. Connect the two by
using the parking hook situated at the back of the jointed
connection.
8. Troubleshooting
PROBLEM: The status light is not illuminated
Cause: The steam cleaner is not plug into a socket or is not switched on
Solution: Insert the mains plug into a socket or switch the steam cleaner on
Cause: The socket is faulty
Solution: Check the socket by unplugging the steam cleaner and plugging in a different appliance
Cause: The power cable is damaged
Solution: Have the cable replaced by a Vax service agent
PROBLEM: No steam is emitted when the steam switch is pressed
Cause: The water tank is empty
Solution: Top up with water.
Cause: Appliance is not yet ready to operate.
Solution: Wait until the appliance has heated up.
Cause: The nozzle is blocked.
Solution: Contact a Vax service agent.
9. UK Service & Help
Vax Care 0870 6061248
Monday-Friday. 9.00am to 5.00pm.
An answerphone will be available out of these hours.
Any queries or concerns about using your Vax, call the
Vax Careline. Calls are charged at the UK national rate.
Please make a note of the model number and serial
number of your Vax before calling. There are over 400
approved Vax Service Agents in the UK. For the
nearest Vax Service Agent, please call the Vax Careline
or visit www.vax.co.uk
10. Technical Specification
Model:
Power Supply:
Motor Power:
Steam Pressure:
Volume of water tank:
Steam Availability:
Weight:
6
17:58
Page 7
V-082/Y
230-240 ~ 50Hz
1700W
2.5 bar
2.5 Litres
Within 30 seconds
6.4 kg
Advertisement
Table of Contents
