Flip-Flop (Relay) Connection And Setup - American Audio DCD-PRO310 MKII User Manual

F -FL (R
LIP OP ELAY
R (FLIP-FLOP™)
ELAY
This feature is a kind of "auto pilot". Flip-Flop™ mode can only function with the both drives
of the DCDPro-310 MKII. With Flip-Flop™ you can have one disc drive begin playback when
the other ends. You can Flip Flop™ single tracks, or entire discs.
Load disc drives with audio discs.
Press the Relay button (12), the LED above the Relay button will light up letting you
know that Flip-Flop™ mode has been activated. Press the SGL/CTN button (7) to choose
between Single mode or Continuous mode.
After they have both cued, press the Play/Pause button (17) on one of your drives to
begin playback.
If you have the CD player set to Single mode, the first CDs' single track will play and after
it has ended the second CDs' track will immediately begin playback. If the player is set to
Continuous mode, the first CD will play all the way through, and then after it has ended
the second CD will start.
FLIP FLOP™ will continue until you stop it or power is interrupted.
To deactivate Flip-Flop™ mode, press the Relay button again.
©American Audio®
) C
ONNECTION AND
www.americanaudio.us
S
ETUP
DCD-PRO310 MKII™ User Manual Page 27