American Audio DCD-PRO310 MKII User Manual page 15

(4) Loop IN Button – This function allows you to set a Cue Point (see page 21 (Setting Cue
Points) without music interruption ("Cue on the fly"). This button also sets the starting point
of a loop (see page 25 (Creating and Playing a Loop).
(5) Repeat Button – When the player is in Single mode and this button is pushed, the song
will repeat until the button is pressed again. The red LED above the button will glow when
this function is active.
(6) +10 Track Skip – This button allows you to skip ahead by 10 tracks. Example: if you are at
Track #1, pressing this button will skip you to Track #11, press the button again, it will skip to
Track #21. If there are not that many tracks, it will go back to Track #1.
(7) SGL/CTN – This button allows the unit's play mode to change between Single and
Continuous. In single mode the unit will play a single track and return to cue mode. In
continuous mode the unit continues to play track by track and returns to cue mode after all
tracks have played.
(8) Pitch Percentage Selector – Choose from pitch percentages of 4%, 8%, and 16%. See
page 22 (Pitch Adjustments) for more details.
(9) Time – The Time button is used to change the displayed time values. Time can be
displayed as Elapsed Track Time, Remaining Track Time, and Total Disc Remaining Time.
(10) Track Buttons –
Track Button – This button is used to select your desired track. Tapping this button
will forward skip to the next track, holding down this button will rapidly forward skip
through the tracks on your CD.
Track Button – This button is used to select your desired track. Tapping this
button will skip backward to the previous track, holding down this button will rapidly
skip backward through the tracks on your CD.
(11) Loop OUT Button – This button is used to set the ending point of a loop. A loop is
started by pressing the IN button (4), pressing the OUT button sets the loop ending point.
The loop will continue to play until the OUT button is pressed once again.
(12) Relay Button – This button is acitvates Flip-Flop™ mode. See page 27 (Relay (FLIP-
FLOP™)) for more information.
(13) Pitch Button – This button is used to turn the pitch function on and off. The pitch
functions of the Pitch Slider (3), Pitch Bend Buttons (14) and Jog Wheel (1) will not function
without this function being activated. The pitch slider and "+" and "-" pitch bend buttons
have a maximum range of +/-16%.
©American Audio® www.americanaudio.us DCD-PRO310 MKII™ User Manual Page 15