American Audio DCD-PRO310 MKII User Manual page 23

Activating the Pitch Slider
(3)
To activate the pitch slider
(3), turn the pitch function
on.
Press the Pitch Button (13) to turn on the pitch function, when the pitch function is activated
a LED will begin to glow. If the pitch function is not activated neither the Pitch Slider (3) nor
the Pitch Bend Buttons (14) will function.
Using the Pitch Slider (3)
To use the Pitch Slider (3)
slide the slider up and
down. Down will increase
the pitch and up will
decrease the pitch.
P B
ITCH END
This function will momentarily increase or decrease a tracks playback speed. There are two
ways to operate this function with the (-) & (+) Pitch Buttons (14) or with the Jog Wheel (1).
The maximum pitch bend percentage allowed is +/-16%. The pitch bend function will work in
conjunction with the Pitch Slider (3) pitch setting.
Pitch Bend Buttons (14)
The (+) Pitch Bend button (14) will provide a speed bump and the (-) Pitch Bend button (14)
will provide a slowdown. The maximum range of the Pitch Bend buttons is 16%. The extent
to which the speed changes are proportionate to the amount of time the button is pressed.
For example, if the (+) Pitch Bend button (14) is held down continuously, the disc speed will
increase and will continue to increase until it reaches a maximum of 16% speed gain. When
you release the (+) Pitch Bend button (14) the disc speed will automatically return to its
previous speed.
©American Audio® www.americanaudio.us DCD-PRO310 MKII™
Figure 11
Figure 12
User Manual Page 23