Flip-Flop (Relay) Connection And Setup; Relay (Flip-Flop™) - American Audio UCD-200 User Manual

F -FL (R
LIP OP ELAY
RELAY (FLIP-FLOP™)
This feature is a kind of "auto pilot". Flip-Flop™ mode can only function with the both drives
of the UCD-200. With Flip-Flop™ you can have one drive begin playback when the other
ends. You can Flip Flop™ single tracks, or an entire music source device.
Load disc drives with audio discs or connect USB.
Press the Relay button (12), the LED above the Relay button will light up letting you
know that Flip-Flop™ mode has been activated. Press the SGL/CTN button (6) to choose
between Single mode or Continuous mode.
After they have both cued, press the Play/Pause button(16) on one of your drives to
begin playback.
If you have the player set to Single mode, the first single track will play and after it has
ended the second track will immediately begin playback. If the player is set to
Continuous mode, the first music source will play all the way through, and then after it
has ended the second music source will start.
FLIP FLOP™ will continue until you stop it or power is interrupted.
To deactivate Flip-Flop™ mode, press the Relay button again.
©American Audio®
) C
ONNECTION AND
www.americanaudio.eu
S
ETUP
UCD-200™ User Manual Page 34