6.2
Driving the scooter
Switch on power supply (key switch). The displays on the control console light up. The scooter
is in running order.
NOTE
If the scooter is not in running order after being switched on, check the status indicator (see
chapter "Status indicator" on page 22 and chapter "Diagnosis and error management" on page
24.
Use speed controller to set the desired driving speed.
Pull the right throttle control lever carefully to drive forward.
Pull the left throttle control lever carefully to drive backward.
NOTE
The control is programmed ex works with standard values. An individual programming to suit you
can be carried out by your Invacare®-appointed retailer.
NOTE:
Simply release throttle control lever to brake quickly. This will automatically return to the middle
position. The scooter will brake.
23