Table of Contents
Advertisement
6.1.1
Status indicator
The status indicator flashes constantly if the scooter is switched on. If the drive electronics
recognise an error, the status indicator displays a corresponding identify flash code.
NOTE
A description of the identify flash codes can be found in chapter "Error Codes and Diagnostic
Codes" on page 26.
6.1.2
Battery charge indicator
Description of the battery charge indicator:
Needle is far right in the green zone: Full range
Needle is in the medium zone: Limited range. Recharge batteries at the end of the drive.
Needle is left in the red zone: Battery reserve = very low range
Charge batteries immediately!
NOTE
Low discharge protection: The electronics automatically switch off the drive after a certain drive
period and bring the scooter to a standstill.
22
Hide quick links:
Advertisement
Table of Contents
