Quick Installation - Tripp Lite SmartPro SMART1050 Owner's Manual

201112101 93-2190.qxd

Quick Installation

1 Plug the UPS into an outlet
on a dedicated circuit.*
NOTE! after you plug the UPS into a live AC
outlet, the UPS will automatically charge its
batteries,** but will not supply power to its
outlets until it is turned ON (see Step 3
below).
* See Specifications for circuit amperage requirements.
Select models include an additional plug which can be
switched by a qualified electrician. See Specifications for
details. ** The BATTERY CHARGE LED will be the only
LED illuminated
2 Plug your equipment into the
UPS.
Note: Your UPS is designed to only support computer
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect exceeds the
UPS's Output Capacity (see Specifications). To find your
equipment's VA ratings, look on their nameplates. If the
equipment is listed in amps, multiply the number of amps
by 120 to determine VA. (Example: 1 amp × 120 = 120
VA). If you are unsure if you have overloaded the UPS's
outlets, see "OUTPUT LOAD LEVEL" LED description.
Turn the UPS ON.
3
Press and hold the "POWER" button for one
second. The alarm will beep once briefly after
one second has passed. Release the button.
12/29/2011 4:21 PM
3
Page 3
1
EXTERNAL
BATTERY
NORM DELAY
SEE MANUAL FOR
PROPER CONNECTION
2
3