Tripp Lite SMART1500 Specification Sheet

Model #: SMART1500
SmartPro Tower UPS System - Intelligent, line interactive network power management system
Description
Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from
blackouts, voltage fluctuations and transient surges. Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during
power failures. 1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types, including
the support of multiple network workstations. Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to
selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment. Supports
remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and
unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter. Built-in audible alarm and 5
front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional
UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from
transient surges. Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space.
Package Includes
SMART1500 UPS System
USB and DB9 monitoring cables
PowerAlert unattended shutdown and UPS/Power monitoring software
Features
1500VA/980 watt power handling capability supports a variety of networking, telecom and various other application types
Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures
Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an
input voltage range of 75-147V
Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot
remote equipment or shed less significant loads to extend battery runtime for more critical equipment
Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions
Communications ports enable safe unattended shutdown without data loss during extended power failures
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage,
DC battery voltage and battery capacity
Communications ports support timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected
equipment
PowerAlert UPS monitoring and unattended shutdown software with complete cabling included
Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting
completely locked computers by automatically switching UPS power off and back on again
Notification of system status via 5 LEDs and multi-function audible alarms
Highlights
1.5kVA / 1500VA line interactive tower UPS system
120V output, Corrects brownouts and overvoltages from 75V to 147V
Front panel status LEDs with load and battery capacity level display
USB & RS232 ports, 1 switched load bank, Hot-swap batteries
NEMA 5-15P input, 6 5-15R outlets
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com