Belkin F6D4230-4 User Manual page 69

UsINg THE WEb-basEd adVaNCEd UsER INTERfaCE
sections
table of contents
Changing system settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, enable remote management, and turn on and
off the NAT function of the Router�
setting or Changing the administrator Password
The Router ships with NO password entered� If you wish to add a
password for greater security, you can set a password here� Write down
your password and keep it in a safe place, as you will need it if you need
to log into the Router in the future� It is also recommended that you set a
password if you plan to use the remote management feature of your Router�
150N Wireless Router
1 2 3 4 5 6
Changing the login Time-out setting
The login time-out option allows you to set the period of time that you can
be logged into the Router's advanced setup interface� The timer starts
when there has been no activity� For example, imagine you have made
some changes in the advanced setup interface, then left your computer
alone without clicking "Logout"� Assuming the time-out is set to 10 minutes,
10 minutes after you leave, the login session will expire� You will have to log
into the Router again to make any more changes� The login time-out option
is for security purposes and the default is set to 10 minutes� Note: Only one
computer can be logged into the Router's advanced setup interface at one
time�
67
7 8 9 10