N Wireless Router - Belkin F6D4230-4 User Manual

alTERNaTE sETUP METHod
sections
table of contents
setting your Internet service Provider (IsP) Connection Type to layer 2 Tunneling Protocol (l2TP)
[Israel Only]� Some ISPs require a connection using L2TP protocol, a type of connection most common in Israel� This sets up a direct connection to the ISP's
system� Type in the information provided by your ISP in the space provided� When you have finished, click "Apply Changes" (7)� After you apply the changes,
the "Internet Status" indicator will read "Connection OK" if your Router is set up properly�
1 l2TP account
Provided by your ISP� Enter your L2TP User ID here�
2 l2TP Password
Type in your password and retype it into the "Retype Password" box to
confirm it�
3 Host Name
Provided by your ISP� Enter your host name here�
4 service IP address
Provided by your ISP� Enter your L2TP gateway/service IP address here�
5 IP assigned by IsP
If your ISP provided you with a specific IP address, select "Yes" and enter
your IP address and subnet mask in the fields that appear�

150N Wireless Router

1 2 3 4 5 6
6 disconnect after X minutes...
This feature is used to automatically disconnect the Router from your ISP
when there is no activity for a specified period of time� For instance, placing
a check mark next to this option and entering "5" into the minute field will
cause the Router to disconnect from the Internet after five minutes of no
Internet activity� This option should be used if you pay for your Internet
service by the minute�
(6)
32
7 8 9
(1)
(2)
(3)
(4)
(5)
10
(7)