N Wireless Router - Belkin F6D4230-4 User Manual

KNoWINg yoUR RoUTER
sections
table of contents
H Connections to Wired Computers – gray
Connect your wired (non-wireless) computers to these ports� These ports
are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP
category 5 or 6 Ethernet cable� The ports are labeled 1 through 4�
I Connection to Modem – yellow
This port is for connection to your cable or DSL modem� Use the cable that
was provided with the router to connect the modem to this port� Use of a
cable other than the one supplied with the router may not work properly�

150N Wireless Router

1 2 3 4 5 6
J Reset button – Red
The "Reset" button is used in rare cases when the Router may function
improperly� Resetting the Router will restore the Router's normal operation
while maintaining the programmed settings� You can also restore the
factory default settings by using the "Reset" button� Use the restore option
in instances where you may have forgotten your custom password�
i Resetting the Router
Push and release the "Reset" button� The lights on the Router will
momentarily flash� The "router" light will begin to blink� When the "router"
light becomes solid again, the reset is complete�
ii Restoring the factory defaults
Press and hold the "reset" button for at least 10 seconds, then release
it� The lights on the Router will momentarily flash� The "router" light will
begin to blink� When the "router" light becomes solid again, the restore is
complete�
K Power Jack – black
Connect the included 12V/1A DC power supply to this jack�
10
7 8 9 10