N Wireless Router - Belkin F6D4230-4 User Manual

alTERNaTE sETUP METHod
sections
table of contents
setting your Internet service Provider (IsP) Connection Type to dynamic IP
A dynamic connection type is the most common connection type found with cable modems� Setting the connection type to "dynamic" in many cases is
enough to complete the connection to your ISP� Some dynamic connection types may require a host name� You can enter your host name in the space
provided if you were assigned one� Your host name is assigned by your ISP� Some dynamic connections may require that you clone the MAC address of the
PC that was originally connected to the modem�
(2)

150N Wireless Router

1 2 3
(1)
(3)
4 5 6
1 Host Name (1)
This space is provided to enter a host name that needs to be visible to
your ISP� Enter your host name here and click "Apply Changes" (3)� If your
ISP did not assign you a host name, or you are not sure, leave this blank�
2 Change WaN MaC address (2)
If your ISP requires a specific MAC address to connect to the service, you
can enter a specific MAC address or clone the current computer's MAC
address through this link�
26
7 8 9 10