Table of Contents
Advertisement
P
F
B
ROGRAMMABLE
UNCTION
UTTON
FILTER
Press the assigned programmable button to enable selecting the receiver bandwidth. To
select the receiver bandwidth, press this button briefly, then press the [ ] / [ ] button to
select the desired receiver bandwidth ("Wide", "Normal", "Narrow", and "Super Narrow:
except the A3E mode"); finally press this button again.
LOCK
Press the assigned programmable button to toggle the Key Lockout feature "on" and "off".
The "
" icon will appear in the LCD when the Key Lockout feature is activated. The
lockout combinations are dependent upon the dealer programming.
MODE
Press the assigned programmable button to select the operating mode. Press this button
repeatedly to toggle among the available operating mode: "J3EU"
"J3EL"
"J2BU"
"J3EU" ...... .
"A1A"
"A3E"
MW
Press the assigned programmable button to activate the "Memory Write" mode.
N/A
This is the No Action command.
NB
Press the assigned programmable button to toggle the Noise Blanker "on" and "off". The
Noise Blanker reduces the noise caused by automotive ignition system.
P.BACK
Press the assigned programmable button to play back the receiver audio for the most-
recent 20 seconds of reception before you press this button.
PRI
Press the assigned programmable button to activate the Priority Scan.
RCV MSG
Press the assigned programmable button to recall the last-received Selcall or ALE Mes-
sage.
RF PWR SEL
Press the assigned programmable button to select the transmit power output level ("Low",
"Medium", and "High"). The "L" icon will appear at the left of the display while operat-
ing on the "Low Power" setting, and the "M" icon will appear at the left of the display
while operating on "Medium Power" setting.
46
VX-1400 O
M
Advertisement
Table of Contents
