Vertex Standard VX-1400 Operating Manual page 43

Hf communications transceiver

Hide thumbs Also See for VX-1400:

Table of Contents

EMORY

HANNEL

TORAGE

Press the [ MW ] button, then press the [ ] / [ ]

button to select the desired ATT or RF AMP fea-

ture. Available selections are "THRU", "ATT",

and "AMP".

If you wish to append this channel to the "Scan"

list, press the [ MW ] button, and then press the

[ ] / [ ] button to select "SCAN ADD" selec-

tion. Otherwise, select "SCAN SKIP" selection.

If you wish to append a Encryption feature to this channel (requires the optional unit),

press the [ MW ] button, then press the [ ] / [ ]

button to select the desired Encryption code

("01" ~ "16"). Otherwise, skip to the next step.

If you wish to control the accessory port of the optional CT-139 Accessory Cable on

this channel, press the [ MW ] button, then press

the [ ] / [ ] button to select the desired logic

("HIGH" or "LOW"). Otherwise, skip to the

next step.

Press the [ MW ] button to store the frequency

and other data into the selected memory chan-

nel.

VX-1400 O

Table of Contents