Security; Radio Disable - Vertex Standard VXD-7200 Operating Manual

n

Security

You can enable or disable any radio in the system.
For example, you might want to disable a stolen
radio, to prevent the thief from using it, and enable
that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is
limited to radios with these functions en-
abled.

1 Radio Disable

Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 or to the required subscriber alias or
ID and press to select.
ENTER
3 The display shows "Radio Disable: <Subscriber
Alias or ID>" and the green LED lights up.
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display
shows "Radio Disable Successful".
OR
If not successful, a tone sounds and the display
shows "Radio Disable Failed".
70
OR
Procedure:
Use the menu.
1 to access the menu.
MENU
2 or to "Contacts" and press
lect. The entries are alphabetically sorted.
3 or to the required alias or ID and press
[ OK ] to select.
4 or to "Radio Disable" and press
select. The green LED blinks.
5 The display shows "Radio Disable: <Subscriber
Alias or ID>" and the green LED lights up.
6 Wait for acknowledgment.
7 If successful, a tone sounds and the display
shows "Radio Disable Successful".
OR
If not successful, a tone sounds and the display
shows "Radio Disable Failed".
Do not press during the Radio Disable opera-
BACK
tion as you will not get an acknowledgement mes-
sage.
to se-
ENTER
to
ENTER