Sending A Quick Text Message With The One Touch Access Button; Viewing A Saved Text Message - Vertex Standard VXD-7200 Operating Manual

OR
If the message cannot be sent, a low tone
sounds the display shows "Message Send
Failed".
1 Sending a Quick Text Message with the One
Touch Access Button
Procedure:
1 Press the programmed One Touch Access but-
ton to send a predefined Quick Text message to
a predefined alias or ID.
2 The display shows "Text Message: <Subscriber/
Group Alias or ID>", confirming your message is
being sent.
3 If the message is sent successfully, a tone
sounds and the display shows "Message Sent".
OR
If the message cannot be sent, the display
shows "Message Send Failed".
1 Managing Text Messages in the Drafts Folder
The Drafts folder stores a maximum of ten (10) last
saved messages. When the folder is full, the next
saved text message automatically replaces the old-
est text message in the folder.

1 Viewing a Saved Text Message

Procedure:
Press the programmed Text Message button and
proceed to Step 3.
OR
Follow the procedure below.
1 to access the menu.
MENU
2
or to "Message" and press
lect.
3 or to "Drafts" and press
4 or to the required message and press
to select.
ENTER
to se-
ENTER
to select.
ENTER
61