Table of Contents
Advertisement
When your radio receives an Emergency Alarm,
and you change the radio channel, the Emergency
Alarm list is hidden.
The new channel displays the Emergency icon and
the red LED blinks. When you change the radio
channel back to the previous channel, it also dis-
plays the Emergency icon and the red LED blinks.
1 Responding to an Emergency Alarm
Procedure:
When receiving an Emergency Alarm:
1 Press any button to stop all Emergency Alarm
received indications.
2
If the Channel Free Indication feature is en-
abled, you will hear a short alert tone the mo-
ment the transmitting radio releases the PTT
button, indicating the channel is free for you to
respond.
3 Press PTT button to transmit non-emergency
voice to the same group that the Emergency
Alarm was targeted to. The green LED lights up.
Your radio remains in the Emergency mode.
56
4 Wait for the Talk Permit Tone to finish (if en-
abled) and speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if en-
abled) and speak clearly into the microphone.
5 Release the PTT button to listen. When the
emergency initiating radio responds, the green
LED blinks. You see the Group Call icon, the
group alias or ID, and transmitting radio alias or
ID on your display.
6 Once your call ends, press
Emergency Off button immediately to clear the
Emergency Call received indications and exit
Emergency mode.
7 The radio returns to the Home screen.
Emergency voice can only be transmitted by the
emergency initiating radio. All other radios (includ-
ing the emergency receiving radio) transmit non-
emergency voice.
, then press
BACK
Advertisement
Table of Contents
