Assembly Instructions - Diamondback 400Tm Owner's Manual

8

Assembly Instructions

Step 3: Handrail Assembly
1. Insert Left handrail into Left handrail receptor.
2. Insert two M6 x12mm screws and tighten them with Allen wrench.
3. Repeat the procedure 1 & 2 for the Right handrail.
4. Make sure all screws are securely tightened.
Step 4: Handrail Cover Assembly
1. Place the Left inner handrail cover into the Left handrail and tighten this cover
with two M5 x12mm screws using Phillips screwdriver.
2. Now place the outer handrail cover through the handrail and into inner cover.
Insert four more M5 x12mm screws. Tighten all 6 screws now.
3. Repeat procedure 1 & 2 for the Right handrail covers.
4. Place the handrail cover inserts into the inner handrail covers.
400 Tm Owner's Manual