Installation In Windows 98; Installation In Windows 95 - Multitech MultiModem USB MT5634ZBA-USB User Manual

MultiModemUSB User Guide

Installation in Windows 98

1. Power up your Windows 98 system.
2. If you have not already done so, connect one end of your USB cable to a USB connector on your
PC, and connect the other end to the USB connector on your modem. The Power LED on your
modem will light.
3. Windows will detect that the new modem is present and launch the Add New Hardware Wizard.
4. Place the Installation diskette provided with your modem into your floppy drive and click Next to
proceed with the installation.
5. Verify that the "Search for the best driver for your device. (Recommended)" option is selected
and click Next.
6. Verify that the "Floppy disk drives" option is selected and click Next.
7. Windows will select the proper driver from the installation disk and will display the information for
verification. Click Next to install the selected driver.
8. A message will appear when Windows finishes installing the driver. Click Finish to complete the
installation and exit the wizard. The TR LED on your modem will light when the installation is
complete.
9. Once installation is complete, you should test the operation of your new MT5634ZBA-USB by
registering your MT5634ZBA-USB product now. Key in the URL given below and follow the on-
line instructions:

Installation in Windows 95

Only Certain versions of Windows 95 offer support for USB peripherals. If you are unsure if your
Win95 system supports USB, a free USB evaluation utility is available from the Shopping Bag page
at http://www.usb.org. Just download the utility (287K) and run the .exe application. It will determine if
you have USB support.
If you would like to install your MT5634ZBA-USB in Windows 95, perform the following steps.
1. Insert the Setup disk provided with your modem into your floppy drive.
2. If you have not already done so, connect one end of your USB cable to a USB connector on your
PC, and connect the other end to the USB connector on your modem. The Power LED on your
modem will light.
3. Windows will detect that the new modem is present and launch the Update Device Driver
Wizard. Click Next to proceed with the installation.
4. Windows searches for the driver on A:\ and, when identified, will display the driver name for
verification. Click Finish to install the driver.
5. Windows prompts you to insert a diskette. You have already inserted the diskette, so click OK to
continue. The Copy Files ... dialog is displayed. In the Copy files from field, choose A:\ from the
drop-down list and click OK.
6. When the driver is installed, a completion message will appear, the TR LED on your modem will
light, and the wizard will exit. At this time your installation is complete.
7. Once installation is complete, you should test the operation of your new MT5634ZBA-USB by
registering your MT5634ZBA-USB product now. Key in the URL given below and follow the on-
line instructions:
18
http://www.multitech.com/register
http://www.multitech.com/register