Heat & Glo TRUE-36C Owner's Manual page 57

6 6
NOTCH NOTCH
(LOG #7 ON TRUE-42 ONLY) (LOG #7 ON TRUE-42 ONLY)
Figure 11.
Log #6 (2281-706): Place Log #6 into appliance as shown in Figure 12. Base of log will sit on bottom refractory and notch
on log will rest against grate tine. Lean top of log into notch on Log #1. See Figure 2.
LOG CONTACTS REFRACTORY LOG CONTACTS REFRACTORY
Figure 13.
Log #7 (2281-707 TRUE-42 ONLY): Place Log #7 into appliance as shown in Figure 13. Right side of log should contact
right refractory and burned portion of log should be centered between front and back tines.
Log #8 (2281-708): Place Log #8 into appliance as shown in Figure 15. Left notch will contact left grate tine and base of log
will rest on bottom refractory.
6 6
LOG CONTACTS LOG CONTACTS
GRATE TINE GRATE TINE
Figure 15.
BURNED BURNED
PORTION PORTION
7 7
BACK TINE BACK TINE
FRONT TINE FRONT TINE
5 5
4 4
8 8
Heat & Glo • TRUE-36, TRUE-42, TRUE-50 • 2282-900 Rev. i •
6 6
LOG RESTS AGAINST LOG RESTS AGAINST
GRATE TINE GRATE TINE
Figure 12.
NOTCH NOTCH
Figure 14.
1 1
6 6
5 5
4 4
8 8
Figure 16. Log Set Installed.
4/13
8 8
3 3
2 2
*LOG #7 TRUE-42 ONLY *LOG #7 TRUE-42 ONLY
2281-935
7* 7*
57