Heat & Glo TRUE-36C Owner's Manual page 31

2. Top Vent - Vertical Termination - (continued)
2 ELBOWS
Note: Flue restrictor is permit-
ted ONLY on 30 ft. minimum
vertical runs with no elbows.
WARNING! Risk of Fire!
• TRUE-36(NG/LP), TRUE-42(NG/LP) and TRUE-50 (NG/LP) models
require a minimum of 24 inches of vertical venting before attaching
any elbow to the appliance.
DO NOT attach elbow directly to the appliance.
Figure 7.8
V
2
H
1
Heat & Glo • TRUE-36, TRUE-42, TRUE-50 • 2282-900 Rev. i •
TRUE-36 (NG/LP), TRUE-42 (NG/LP),
TRUE-50 (NG/LP)
V
1
2 ft 610 mm 1 ft
3 ft 914 mm 3 ft
4 ft 1.2 m 4 ft
5 ft 1.5 m 9 ft
6 ft 1.8 m 12 ft
V + V + H = 50 ft (15.2 m) Max.
1 2 1
*No specifi c restrictions on this value EXCEPT
V + V + H cannot exceed 60 ft (18.3 m).
1 2 1
After V = 6 ft, then H
1 1
V
1
4/13
H V
1 2
305 mm *
914 mm *
1.2 m *
2.7 m *
3.7 m *
Max.= V x 2
1
31