Ford 2013 Flex Owner's Manual page 229

The system is designed to automatically adjust your speed to maintain a
proper distance between you and the vehicle in front of you in the same
lane. The driver can select from one of four GAP settings, the controls
are located on the steering wheel.
At startup, the system sets the gap to the last selected setting. Once
activated, the driver can deactivate the system at any time by pressing
the brake pedal, pressing the steering wheel ON/OFF control or pressing
the RES/CNCL control. In addition, the driver can temporarily increase
the vehicle speed above the current speed by manually pressing on the
accelerator pedal.
RES
CNCL
SET
ON
OFF
Setting Adaptive Cruise Control
2. Accelerate to the desired speed.
3. Press SET upward and release. The vehicle speed will be stored in the
memory.
The information display will show a green indicator light,
current gap setting and desired set speed.
4. Take your foot off the accelerator pedal.
2013 Flex (471)
Owners Guide gf, 2nd Printing
USA (fus)
Cruise Control
The controls for using your cruise
control are located on the steering
wheel.
GAP
1. Press and release ON.
The information display will show
the gray indicator light, current gap
setting and SET.
5. A lead vehicle graphic will
illuminate if there is a vehicle
detected in front of you.
229