Motor Damping Isolator Replacement - KitchenAid KFP710 Service Manual
Hide thumbs
Also See for KFP710:
- Instructions and recipes manual (83 pages) ,
- Instructions and recipes manual (80 pages) ,
- Instructions and recipes manual (83 pages)
Table of Contents
Advertisement
MOTOR DAMPING GROMMET REPLACEMENT
- 9 & 12 CUP FOOD PROCESSOR MODELS WITH
CAST MOTOR HOUSING -
To replace the motor damping grommet:
1.
Unplug the power cord and remove the housing base.
2.
If the motor damping grommet is worn or damaged,
remove it by pulling it from its nest in the center of the
housing base.
3.
Replace the motor damping grommet into its nest in the
center of the housing base (flatter-surfaced side down)
making sure it is fully seated in the base.
8
MOTOR DAMPING ISOLATOR REPLACEMENT
- 9 & 12 CUP FOOD PROCESSORS WITH
SHEET METAL MOTOR HOUSING -
To replace any of the three (3) motor damping isolators:
1.
Unplug the power cord and remove the housing base.
2.
If any of the three (3) motor damping isolators are worn or
damaged, remove it by pulling it from its nest in the
housing base.
3.
Replace the motor damping isolator(s) into its nest in the
housing base (long side down) making sure it is fully
seated in its mounting position in the base.
Hide quick links:
Advertisement
Table of Contents
