Great Dane Super Surfer Series II GSKH2352S Operator's Manual page 3

WARNING:
from this product contains chemicals known
to the State of California to cause cancer,
birth defects or other reproductive harm.
California Proposition 65 Warning
All information, illustrations and
specifications in this manual are based on
the latest information at the time of
publication. The right is reserved to make
changes at any time without notice.
COPYRIGHT© 2007
Auburn Consolidated Industries, Inc.
All rights reserved
Previous Editions
COPYRIGHT© 2002
The Engine Exhaust
Introduction
Using Your Operator's Manual
This manual is an important part of your machine and should remain with
the machine when you sell it.
Use the safety and operating information in the machine operator's
manual to operate and service the machine safely and correctly.
An engine manufacturer's owner's manual has been provided with your
machine. This will provide maintenance and troubleshooting information
for the engine installed in your machine.
Specifications and design are subject to change without notice.
Special Messages
Your manual contains special messages to bring attention to potential
safety concerns, machine damage as well as helpful operating and
servicing information. Please read all the information carefully to avoid
injury and machine damage.
c
CAUTION: Avoid injury! This symbol and text highlight
potential hazards or death to the operator or
bystanders that may occur if the hazards or
procedures are ignored.
IMPORTANT: Avoid Damage! This text is used to tell the operator
of actions or conditions that might result in damage to the
machine.
NOTE: General information is given throughout the manual that may
help the operator in the operation or service of the machine.
Product Identification
Record Identification Numbers
Super Surfer
GSKH18-48S Serial Number (636510001-)
GSKH23-52S Serial Number (636610001-)
GSKH25-61S Serial Number (636710001-)
GSKW1948S Serial Number (636410001-)
GSKW2352S Serial Number (637010001-)
GSKA1948S Serial Number (6373010001-)
If you need to contact an Authorized Service Center for information on
servicing, always provide the product model and serial numbers.
You will need to locate the model and serial numbers for the machine and
for the engine of your machine and record the information in the spaces
provided.
DATE OF PURCHASE:
_________________________________________
DEALER NAME:
_________________________________________
DEALER PHONE:
_________________________________________
PRODUCT IDENTIFICATION NUMBER:
Model Number
_________________________________________
Serial Number
_________________________________________