Using The Key Switch; Using The Pto - Great Dane Chariot / Chariot LX GDRZ48-17KAE Operator's Manual

• Raise and pull rearward park brake lever (A) to the lock
park brake.
Unlocking Park Brake:
• Lower park brake lever (A) forward to unlock the park
brake.
OPERATING
A
MX15275
A
MX15292
Operating - 14

Using the Key Switch

NOTE: Machine will only start if the following
conditions exist:
• Park brake is locked.
• PTO is disengaged.
• Motion control levers are in the neutral detent
position (standard levers) or neutral lock position
(optional "over the lap" levers).
STOP
• To turn ignition off, turn key to the STOP position (A).
• To turn ignition on, turn key to the run position (B).
• To start engine, turn key to the start position (C). Once
engine begins to run, release key back to the run position.

Using the PTO

Engage PTO:
1. Move throttle lever (A) to the 1/2- to 3/4-throttle position.
2. Pull PTO knob (B) up to engage mower deck.
3. Move throttle lever (A) forward to the fast detent position
(C) for mowing.
Disengage PTO:
• Push PTO knob (B) down.
A
B
C
B
A
MX15284
MIF
C