Table of Contents
Advertisement
STORM WARNING THRESHOLD VALUE SETTING
You may also define a switching sensitivity value for the storm warning display at a
decrease of air pressure from .09 inHg to .27 inHg over 6 hours (Default 0.15 inHg).
Flashing
1.
The sensitivity value will start flashing.
2.
Use the + or MIN/MAX key to select the value.
3.
Confirm with the SET key and enter the STORM ALARM ON/OFF SETTING.
STORM ALARM ON/ OFF SETTING
You may also choose to switch On or Off the acoustic storm warning alarm (Default
OFF).
1.
The digit "AOF" will start flashing.
2.
Use the + key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)
3.
Confirm with the SET key and the normal display mode will be shown.
Flashing
4.
Press the + or MIN/MAX key to set the minute of the alarm time. Press the
ALARM key to confirm. Wait for about 30 seconds and the display will return to
normal display mode automatically.
5.
In the normal display mode, press the ALARM once key to go to the time alarm
setting mode again. Then press shortly the SET key to switch on or off the time
alarm. (The showing of the icon ((( ))) means that the time alarm is switched on.)
6.
Press the HISTORY key or wait for about 30 seconds and the display will return
to normal display mode automatically.
Note:
The alarm ringing duration is 2 minutes. To stop the alarm, press any key during the
alarm ringing.
WEATHER ALARM OPERATIONS
The weather alarms can be set when certain weather conditions are met according to
your requirements. For example, you can set the thresholds for the outdoor
temperature to +104°F (high) and 14°F (low), while only enabling the high alarm and
disabling the low alarm (i.e. temperatures <14°F won't trigger alarm, but temperatures
>+104°F will).
24
26
Note:
In case a storm warning alarm is activated, the downward weather tendency arrow will
be flashing. (Also see WEATHER TENDENCY INDICATOR below)
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting anytime during the manual setting modes, press the
ALARM key (or HISTORY key) or wait for the automatic timeout. The mode will return
to the normal time display.
TIME ALARM SETTING
The alarm time can be set by the use of the ALARM and SET key.
1.
Press the ALARM key once. The "ALARM" icon and time digits are shown at the
top right of the LCD.
Alarm-On icon
2.
Press and hold the SET key for about 2 seconds. The hour digit of the alarm
time will start flashing. Press the + or MIN/MAX key to set the hour of the alarm
time.
3.
Press the SET key to confirm and advance to the minute setting. The minute
digit will be flashing.
Outdoor temp
Alarm-On icon
The Weather Center can be set to alert when a specific weather condition is reached.
The following Weather Alarm settings can be adjusted in the ALARM setting
mode.
•
High outdoor temperature alarm
•
Low outdoor temperature alarm
•
High outdoor humidity alarm
•
Low outdoor humidity alarm
•
High wind speed alarm
Alarm time
digit
25
High wind
speed Alarm-
On icon
Outdoor humidity
Alarm-On icon
27
Advertisement
Table of Contents
