Storm Warning Treshold Value Setting; Storm Alarm On/Off Setting; Time Alarm Setting; Weather Alarm Operations - La Crosse Technology WS-1516-IT Instruction Manual

STORM WARNING THRESHOLD VALUE SETTING
You may also define a switching sensitivity value for the Storm warning display at a decrease of
air pressure from .09 inHg to .27 inHg over 6 hours (Default 0.15 inHg).
1. The sensitivity value will start flashing.
2. Use the + or MIN/MAX key to select the value.
3. Confirm with the SET key and enter the STORM ALARM ON/OFF SETTING.
STORM ALARM ON/ OFF SETTING
You may also choose to switch On or Off the acoustic Storm warning alarm (Default OFF).
1. The digit "AOF" will start flashing.
2. Use the + or MIN/MAX key to switch On or Off the alarm. ("AOF" = OFF; "AON" = On)
3. Confirm with the SET key and the normal display mode will be shown.
Note:
In case a storm warning alarm is activated, the downward weather tendency arrow will be
flashing. (Also see WEATHER TENDENCY INDICATOR below)
The alarm ringing duration is 2 minutes. To stop the alarm, press any key during the alarm
ringing.

WEATHER ALARM OPERATIONS

The Weather alarms can be set when certain weather conditions are met according to your
requirements. For example, you can set the thresholds for the outdoor temperature to +104°F
(high) and 14°F (low), while only enabling the high alarm and disabling the low alarm (i.e.
temperatures <14°F won't trigger alarm, but temperatures >+104°F will).
Outdoor temp
Alarm-On icon
Flashing
Flashing
Flashing
25
High wind speed
Alarm-On icon
Outdoor humidity
Alarm-On icon
27
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting anytime during the manual setting modes, press the ALARM key (or
HISTORY key) or wait for the automatic timeout. The mode will return to the normal time display.

TIME ALARM SETTING

The alarm time can be set by the use of the ALARM and SET key.
1. Press the ALARM key once. The time digits are shown at the top right of the LCD.
Alarm-On icon
2. Press and hold the SET key for about 2 seconds. The hour digit of the alarm time will start
flashing. Press the + or MIN/MAX key to set the hour of the alarm time.
3. Press the SET key to confirm and advance to the minute setting. The minute digit will be
flashing.
4. Press the + or MIN/MAX key to set the minute of the alarm time. Press the ALARM key to
confirm. Press the HISTORY key or wait for about 30 seconds and the display will return to
normal display mode automatically.
5. In the normal display mode, press the ALARM once key to go to the time alarm-setting
mode again. Then press shortly the SET key to switch on or off the time alarm. (The
showing of the icon ((())) means that the time alarm is switched on.)
6. Press the HISTORY key or wait for about 30 seconds and the display will return to normal
display mode automatically.
Note:
The Weather Center can be set to alert when a specific weather condition is reached.
The following Weather Alarm settings can be adjusted in the ALARM setting mode.
High outdoor temperature alarm

Low outdoor temperature alarm

High outdoor humidity alarm

Low outdoor humidity alarm

High wind speed alarm

Default alarm values:
Low 32F
Temperature
High
104F
Low 45%
Relative
Humidity High 70%
Wind speed High 62.0mph
HIGH AND LOW OUTDOOR TEMPERATURE ALARM SETTING
Note:
The High and Low outdoor temperature alarm can be set On/Off independently, according to
your needs.
Set the Outdoor temperature alarm value (High or Low alarm value) :
1. In the normal display mode, press the ALARM key twice. The High Outdoor Temperature
alarm display will be shown.
High alarm icon
Alarm-On icon
Alarm time digit
26
28