Pressure Sensitivity Settings: 2, 3, Or 4; Storm Warning Threshold: 3-9; Wind Speed Units: Mph, Km/H, M/S, Knots, And Bft; Rainfall Units: Inches Or Millimeters - La Crosse Technology 308-2316 Instruction Manual

Pressure Sensitivity Settings: 2, 3, or 4

Pressure sensitivity settings are changed when your forecast icons do not seem to be changing
properly after the weather station has been set up for a week. People who live near large bodies
of water or in the desert may need to adjust this setting. Most of the time it will not need
adjustment.
Note: The lowest number is used near the coastline, the highest number is for
the desert, and middle number is for everywhere else.
27.The number 2, 3 or 4 (pressure sensitivity) will flash in the pressure area.
28.Press + or MIN/MAX button to select 2, 3, or 4 for a sensitivity setting.
29.Press the SET button to confirm selection and move to set the storm
warning threshold.

Storm Warning Threshold: 3-9

The storm warning will alert you (flashing storm icon) if the pressure has dropped lower than the
threshold set, in a three hour period.
30.The number 4 (storm warning threshold) will flash in the pressure area.
31.Press + or MIN/MAX button to select a threshold from 3-9 for the storm
warning.
32.Press the SET button to confirm selection and move to set the wind speed
units.

Wind Speed Units: mph, km/h, m/s, knots, and bft

33.The wind speed number and unit will flash.
34.Press + or MIN/MAX button to choose from:
 Km/h= kilometers per hour
 Mph= miles per hour
 m/s= meters per second
 knots= knots
 bft= Beaufort Scale
35.Press the SET button to confirm selection and move to the rainfall units.

Rainfall Units: Inches or Millimeters

36.The rainfall number and unit will flash.
37.Press + or MIN/MAX button to choose inches or millimeters.
38.Press the SET button to confirm selection and exit the setting mode.

Quick Display Mode

The Quick Display Mode allows you to quickly view different readings that share the same
display area.

Outdoor Temperature, Wind Chill or Dew Point display

1. Press and release the SET button once. The
Outdoor Temperature area will flash.
2. Press the + or MIN/MAX buttons to display:
 Outdoor Temperature
 Wind Chill
 Dew Point
Model: 308-2316 www.lacrossetechnology.com/support Page | 10