Saving The Configuration Changes; Rebooting The Phone Remotely - Grandstream Networks GXP1405 User Manual

No Key Entry Timeout
Use # as Dial Key
G723 Rate
G726-32 Packing Mode
ilbc Frame Size
ilbc Payload Type
Conference URI
Special Feature
S C
AVING THE ONFIGURATION
After the user makes a change to the configuration, press the "Update" button in the Configuration Menu.
The web browser will then display a message window to confirm saved changes.
We recommend rebooting or powering cycle the IP phone after saving changes.
R P
EBOOTING THE HONE
Press the "Reboot" button at the bottom of the configuration menu to reboot the phone remotely. The web
browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in
again.
Grandstream Networks, Inc.
Default is 4 seconds.
This parameter allows users to configure the "#" key as the "Send" (or "Dial") key. If
set to "Yes", the "#" key will immediately send the call. In this case, this key is
essentially equivalent to the "(Re)Dial" key. If set to "No", the "#" key is included as
part of the dial string.
Encoding rate for G723 codec. By default, 6.3kbps rate is set.
Select "ITU" or "IETF" for G726-32 packing mode.
ilbc packet frame size. Default is 20ms. For Asterisk PBX, 30ms might be required.
Payload type for Ilbc. Default value is 97. The valid range is between 96 and 127.
Configure the conference URI when using Broadsoft N-way calling feature.
Default is Standard. Choose the selection to meet special requirements from Soft
Switch vendors.
C
HANGES
R
EMOTELY
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 33 of 36
Last Updated: 08/2011