Grandstream Networks GXP1405 User Manual page 26

Syslog Level
Send SIP Log
NTP server
Allow DHCP Option 42
to override NTP server
SSL Certificate
SSL Private Key
SSL Private Key
Password
Distinctive Ring Tone
System Ring Tone
Grandstream Networks, Inc.
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
INFO, WARNING or ERROR. Syslog messages are sent based on the following
events:
•
product model/version on boot up (INFO level)
•
NAT related info (INFO level)
•
sent or received SIP message (DEBUG level)
•
SIP message summary (INFO level)
•
inbound and outbound calls (INFO level)
•
registration status change (INFO level)
•
negotiated codec (INFO level)
•
Ethernet link up (INFO level)
•
SLIC chip exception (WARNING and ERROR levels)
•
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components:
message.
For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000].
Ethernet link is up.
When setting the "Yes", phone will send out SIP Log to syslog server. Default
setting is "No".
This parameter defines the URI or IP address of the NTP (Network Time Protocol)
serve. It is used to display the current date/time.
Default is "Yes". This allows device gets provisioned for DHCP Option 42 from the
server automatically.
This defines the SSL certificate needed to access certain websites.
This defines the SSL Private key.
This defines the SSL private key password.
Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a
particular Caller ID. The GXP1400/1405 will ONLY use selected ring tones for
particular Caller IDs. For all other calls, the GXP1400/1405 will use System Ring
Tone. When selected and no Caller ID is configured, the selected ring tone will be
used for all incoming calls.
System ring tone. Default is North American standard.
Adjust system ring tone frequencies and cadences based on local telecom
standard.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
GS_LOG: [device MAC address][error code] error
Page 25 of 36
Last Updated: 08/2011