Grandstream Networks GXP1405 User Manual page 22

802.1x Mode
Line Keys x
Time Zone
Self-Defined Time
Zone
Weather Update
LCD Contrast
Time Display Format
Disable in-call DTMF
display
Grandstream Networks, Inc.
This option allows the user to enable/disable 802.1x mode on the phone. The default
value is disabled. To enable 802.1x mode, this field should be set to EAP-MD5. Once
enabled, the user would be required to enter the following information below to be
authenticated on the network:
•
Identity
•
MD5 Password
This allows the user to configure the account mapped to each line key, as well as
enabling SCA (Shared Call Appearance) for the line.
Options available for Key Mode are :
1. Line
2. Shared Line
This parameter controls the date/time display according to the specified time zone.
If "Allow DHCP Option 2 to override Time Zone setting" is checked, the time zone will
be overridden by the DHCP server.
This parameter allows the users to define their own time zone.
The syntax is: std offset dst [offset], start [/time], end [/time]
Default is set to: MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5,
This indicates a time zone with 6 hours offset with 1 hour ahead which is U.S central
time. If it is positive (+) if the local time zone is west of the Prime Meridian (A.K.A:
International or Greenwich Meridian) and negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3
Tuesday...)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon, Tues, ... ,Sat)
Therefore, this example is the DST which starts from the first Sunday of April to the
1st Sunday of November.
By default, "Enable Weather Update:" is set to "Yes". If set to "No", weather
information will not display on the phone.
Settings to customize the display of weather via:
•
City Code – Automatic or enter city code (default is Automatic)
•
Update Interval – Refresh time in minutes (default is 5 mins)
•
Degree Unit – Select Automatic, Fahrenheit or Celsius (default is Automatic)
This is displayed when "Enable Weather Update" is set to "Yes" and pressing the
'SwitchSCR' soft-key once.
Set LCD contrast. Range from 0 to 20.
LCD time display in 12 hour or 24 hour format.
Default is "No". This field is used to hide the keypad input during a call.
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
Page 21 of 36
Last Updated: 08/2011
rd