Making Phone Calls; Table 9: Gxp1400/1405 Keypad Buttons - Grandstream Networks GXP1405 User Manual

DND Icon:
Calls Forwarded Icon:
MUTE Icon:
SRTP Icon:

Table 9: GXP1400/1405 KEYPAD BUTTONS

Button Descriptions
HOLD Place active call on hold
TRANSFER Transfer an active call to another number
CONF Press CONF button to connect Calling/Called party into conference
LINE 1 / LINE 2
Switch between Line 1 and Line 2
Mute an active call; or use as DND button when the phone is in idle state.
Press HEADSET key to answer/hang up phone calls when using headset. It also
allows user to toggle between headset and speaker
Enable/Disable hands-free speaker
Enable/Disable handset mode; or used as SEND/REDIAL
Press the four navigation keys to move up/down/left/right
Press the round button in the center to enter Keypad Configuration "MENU"
mode when phone is idle. Or use it as ENTER key when in Keypad
Configuration
Adjust volume by pressing "– "or "+"
Standard phone keypad; press # key to send call; press * key to for IVR
0 - 9, *, #
functions
M P C
AKING HONE ALLS
Handset, Headset and Speakerphone
The GXP1400/1405 allows you to make phone calls via handset, headset or speakerphone. During the
active calls the user can switch between the handset, headset and the speakerphone by pressing the
corresponding keys on the phone.
Grandstream Networks, Inc.
OFF - "Do Not Disturb" disabled
INDICATES calls are forwarded. Please refer to call forwarding procedures
INDICATES call is on MUTE during the call
INDICATES SRTP is enabled for the call
GXP1400/1405 User Manual
Firmware version: 1.0.1.83
ON - "Do Not Disturb" enabled
Last Updated: 08/2011
Page 9 of 36