Bose PackLite Owner's Manual page 9

English Dansk
4.
5.
6.
B1 bass
Figure 5
modules
Example of
using multiple
A1 amplifiers
CAUTION:
module that is already connected to the Amp 3 OUT connector of
a PS1 power stand or to another A1 amplifier.
Note:
stacked in a column. Stacking may improve acoustic
output.
Deutsch Español
Using another ¼" TRS cable, connect the THRU connector
on the first A1 amplifier to the INPUT connector of the next
A1 amplifier.
Connect a B1 bass module to the OUTPUT connector on
each A1 amplifier. If desired, connect a second B1 to the first
B1.
Set power switch on both A1 amplifiers to ON (I).
Next
A1
First
A1
PS1 power stand
B1 bass
modules
Be careful not to connect the A1 amplifier to a B1 bass
Up to four (maximum) B1 bass modules can be
Français Italiano
P L TM P
ACK ITE OWER
Nederlands Svenska
A M
MPLIFIER ODEL
B1 bass
modules
A1
9