Bose PowerShare PS602P Installation And Operating Manual
Adaptable power amplifiers
Hide thumbs
Also See for PowerShare PS602P:
- Installation and operating manual (40 pages) ,
- Installation and operating manual (46 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bose PowerShare PS602P
Summary of Contents for Bose PowerShare PS602P
- Page 1 PS602 PS602P PS604 PowerShare Adaptable Power Amplifiers Installation and Operating Guide Guía de instalación y funcionamiento Guide d’installation et d’utilisation Installations- und Bedienungsanleitung Manuale di installazione e funzionamento Installatie- en bedieningshandleiding...
- Page 2 WARNINGS: • All Bose products must be used in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the product is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
- Page 3 Important Safety Instructions pro.Bose.com Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Page 4 ADVERTENCIA: • Todos los productos Bose deben instalarse conforme a las leyes locales, estatales, federales y del sector. Es responsabilidad del instalador asegurarse de que la instalación del producto se realice conforme a las normas legales correspondientes, incluidas las normas de construcción locales. Consulte a la autoridad local competente antes de instalar este producto.
- Page 5 Este producto cumple los requisitos de todas las Directivas de la UE aplicables legalmente. Encontrará la declaración de conformidad completa en www.Bose.com/compliance. Especificaciones del Producto:...
- Page 6 AVERTISSEMENTS: • Tous les produits Bose doivent être installés dans le respect des réglementations locales et nationales. L’installateur est responsable du respect de tous les codes et règlements locaux et nationaux en vigueur applicables à l’installation du produit. Consultez les autorités locales compétentes avant d’installer ce produit.
- Page 7 à la pluie ou à l’humidité, mauvais fonctionnement, chute de l’appareil, etc.). Ce produit est conforme à toutes les directives de la Communauté Européenne qui s’y appliquent. L’attestation complète de conformité est disponible à l’adresse www.Bose.com/compliance. Spécifications du produit: Tension d’entrée : 100-240 VAC...
- Page 8 WARNUNG: • Alle Produkte von Bose müssen gemäß den örtlichen und staatlichen Vorschriften sowie gemäß allen Branchenbestimmungen verwendet werden. Der Monteur ist dafür verantwortlich, sicherzustellen, dass die Installation des Produkts gemäß allen geltenden Vorschriften durchgeführt wird, einschließlich örtlicher Bauvorschriften und Bestimmungen. Wenden Sie sich vor der Installation dieses Produkts an die zuständige Abnahmebehörde.
- Page 9 Fällen nötig: Bei jeglichen Beschädigungen wie z. B. des Netzkabels oder Netzsteckers, wenn Flüssigkeiten oder Gegenstände in das Gehäuse gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, fallen gelassen wurde oder nicht ordnungsgemäß funktioniert. Dieses Produkt erfüllt alle vorgeschriebenen EU-Richtlinien. Die vollständige Konformitätserklärung ist einsehbar unter www.Bose. com/compliance. Leistungsdaten: Eingangsspannung: 100–240 VAC...
- Page 10 AVVERTENZA: • Tutti i prodotti Bose devono essere installati in conformità con gli standard locali, statali, federali e di settore. È responsabilità dell’installatore assicurare che l’installazione del prodotto sia eseguita in conformità con tutte le normative vigenti, compresi i regolamenti edilizi locali. Prima di installare il prodotto, chiedere informazioni all’autorità locale preposta.
- Page 11 è stato esposto a pioggia o umidità, se non funziona normalmente o è caduto. Questo prodotto è conforme a tutte le direttive EU prescritte dalla legge. La dichiarazione di conformità completa è disponibile all’indirizzo www.Bose.com/compliance. Rating del prodotto:...
- Page 12 WAARSCHUWINGEN: • Alle Bose-producten moeten worden geïnstalleerd volgens de plaatselijke en landelijke voorschriften en industrienormen. Het is de verantwoordelijkheid van de installateur om ervoor te zorgen dat de installatie van het product wordt uitgevoerd volgens alle van toepassing zijnde voorschriften, inclusief plaatselijke bouwvoorschriften. Neem contact op met de juiste plaatselijke overheidsinstanties voordat u dit product installeert.
- Page 13 Dit product voldoet aan alle vereisten van de EU-richtlijnen, zoals wettelijk vereist. De volledige conformiteitsverklaring kunt u vinden op www.Bose.com/compliance. Productvermogen: Ingangsspanning: 100-240 VAC...
-
Page 15: Table Of Contents
PowerShare PS602 ....................................18 PowerShare PS602 Front Panel ..............................18 PowerShare PS602 Rear Panel ..............................19 PowerShare PS602P ..................................... 20 PowerShare PS602P Front Panel ............................. 20 PowerShare PS602P Rear Panel ..............................21 PowerShare PS604 ....................................22 PowerShare PS604 Front Panel ..............................22 PowerShare PS604 Rear Panel ..............................23 Installation and Operation Setting up the PowerShare Amplifier .............................24... -
Page 16: Product Overview
Bose loudspeaker EQs, 9-band PEQs, standard mixing, crossover, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications. -
Page 17: Included Accessories
Introduction pro.Bose.com Included Accessories Each PowerShare amplifier carton contains one amplifier plus the items indicated in the following table: PS602 PS602P PS604 12-pin Euroblock 8-pin Euroblock 3-pin Euroblock 2-pin Euroblock 1 black, 2 green 1 black 1 black AC power cord* Owners Guide * The appropriate power cord for your region is included. -
Page 18: Front And Rear Panels Powershare Ps602
Front and Rear Panels pro.Bose.com PowerShare PS602 The PS602 is a 2-channel installed amplifier that allows its total 600 watts to be shared asymmetrically across both outputs. Independently control the output level, EQ, and low-impedance/high-impendance (Low-Z/Hi-Z) settings for each output. The PS602 supports built-in loudspeaker EQs for the FreeSpace® DS 16, DS 40, DS 100, FS3B, Panaray® 402 and 802 Series IV, MA12EX, and RoomMatch®... -
Page 19: Powershare Ps602 Rear Panel
CHANNEL 1 & 2 EQ – Each dial provides loudspeaker equalization presets per channel: DS 16, DS 40, DS 100, FS3B, 402, 802, MA12EX, RMU105, and RMU108. Use the Flat setting for FS3 Systems, or for loudspeakers that are not Bose or that do not require EQ. -
Page 20: Powershare Ps602P
802 Series IV, MA12EX, and RoomMatch Utility RMU105 and RMU108, as well as a Flat setting for FS3 systems. For applications that require more customization, access the advanced digital loudspeaker processing features using the free web-downloadable PowerShare Editor software. PS602P Front Panel Figure 4. PowerShare PS602P amplifier front panel SIGNAL POWER LIMIT... -
Page 21: Powershare Ps602P Rear Panel
CHANNEL 1 & 2 EQ – Each dial provides loudspeaker equalization presets per channel: DS 16, DS 40, DS 100, FS3B, 402, 802, MA12EX, RMU105, and RMU108. Use the Flat setting for FS3 Systems, or for loudspeakers that are not Bose or that do not require EQ. -
Page 22: Powershare Ps604
Front and Rear Panels pro.Bose.com PowerShare PS604 The PS604 is a 4-channel installed amplifier that allows its total 600 watts to be shared asymmetrically across all four outputs. Independently control the output level, EQ, and low-impedance/high-impedance (Low-Z/Hi-Z) settings for each output. The PS604 supports built-in loudspeaker EQs for the FreeSpace DS 16, DS 40, DS 100, FS3B, Panaray 402 and 802 Series IV, MA12EX, and RoomMatch Utility RMU105 and RMU108, as well as a Flat setting for FS3 systems. -
Page 23: Powershare Ps604 Rear Panel
CHANNEL 1, 2, 3, 4 EQ – Each dial provides loudspeaker equalization presets per channel: DS 16, DS 40, DS 100, FS3B, 402, 802, MA12EX, RMU105, and RMU108. Use the Flat setting for FS3 Systems, or for loudspeakers that are not Bose or that do not require EQ. -
Page 24: Installation And Operation
Installation and Operation pro.Bose.com Setting up the PowerShare Amplifier The asymmetrical PowerShare capability of the amplifier is easy to use and does not require software to configure. Simply set the output trims according to the power you want distributed to each output load, and the amplifier ensures that the 600 watts peak power is not exceeded. -
Page 25: Importance Of Proper Ventilation
Installation and Operation pro.Bose.com Importance of Proper Ventilation For placement of the amplifier, keep the following in mind: • Make sure that air can circulate freely from left to right for adequate ventilation. There are vents on the sides. • The temperature of the rack should be controlled to ensure that amplifiers are not exposed to ambient temperatures exceeding 40°... -
Page 26: Remote Volume Control
ControlCenter Zone Controllers Remotely control the volume of the PS602 and PS604 amplifiers using the Bose® CC-1 ControlCenter zone controllers. Controllers are available in two colors (white and black) for each of three regions (North America, Japan, and EU). The North America and Japan controllers fit into any regional 1-gang electrical box, and do not include a wall plate cover. -
Page 27: Distributed Cc-1 Zone Controller Connection To The Amplifier
Remote Volume Control pro.Bose.com Distributed CC-1 Zone Controller Connection to the Amplifier For installations using multiple CC-1 zone controllers, you can also connect the zone controllers to the CV41 4-to-1 Converter, then create a single home run from the CV41 back to the amplifier. Create these connections using CAT 5 cables and RJ-45 connectors. -
Page 28: Software Interface
• Vpeak and Vrms Limiters Both values are loaded automatically when a Bose loudspeaker is selected in the Loudspeaker EQ block. The values are always adjustable. In 70V mode, a 100 Vpeak limiter is automatically loaded. In 100V mode, a 141 Vpeak limiter is automatically loaded. -
Page 29: 2-Channel Configuration
Software Interface pro.Bose.com 2-Channel Configuration (PS602 and PS602P) Figure 12. PowerShare Editor software 2-channel configuration for PS602 and PS602P amplifiers 4-Channel Configuration (PS604 only) Figure 13. PowerShare Editor software 4-channel configuration for PS604 amplifier English 29 Installation Guide... -
Page 30: Technical Information
Technical Information pro.Bose.com LED Fault Indications Figure 14. PS602 and PS602P Figure 15. PS604 SIGNAL SIGNAL POWER POWER LIMIT LIMIT PowerShare PowerShare PS602 Adaptable Power Ampli er Adaptable Power Amplifier POWER LED (all amplifiers) Solid amber LED indicates an over-temperature fault... -
Page 31: Troubleshooting
• Verify that the proper EQ preset is selected for the loudspeakers being used. Limited Warranty Your product is covered by a limited warranty, Visit pro.Bose.com for warranty details. The warranty information provided with this product does not apply in Australian and New Zealand. See our website at www.bose.com/au/warranty or www.bose.com/nz/warranty for details of the Australian and New Zealand warranty. -
Page 32: Ac Draw And Thermal Dissipation Information
Technical Information pro.Bose.com AC Current Draw and Thermal Dissipation Information Amplifier rated channel power is 600 W, distributed across two outputs for the PS602 and PS602P, or across four outputs for the PS604. PS602, PS602P, PS604 AC Current Draw and Thermal Dissipation (120 VAC, 60 Hz) -
Page 33: Technical Specifications
Technical Information pro.Bose.com PS602, PS602P, and PS604 Technical Specifications Power Rating PS602 PS602P PS604 Amplifier Power 2 x 300 W 2 x 300 W 4 x 150 W Maximum Power per Channel 600 W @ 4-8 Ω, 70/100V 600 W @ 4-8 Ω, 70/100V 600 W @ 4-8 Ω, 70/100V... -
Page 34: Eq Settings
Technical Information pro.Bose.com EQ Settings The following table shows the Bose® loudspeaker EQ file that corresponds to the EQ dial setting on the rear panel of the amplifier. EQ Dial Position Setting Bose Loudspeaker EQ File FLAT Flat DS16 DS16F Pendant... -
Page 35: Block Diagrams
Block Diagrams pro.Bose.com English 35 Installation Guide... -
Page 36: Powershare Ps602P
Block Diagrams pro.Bose.com 36 English Installation Guide... -
Page 37: Powershare Ps604
Block Diagrams pro.Bose.com English 37 Installation Guide... -
Page 39: Contact Information
Taiwan Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Mexico Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. English 39 Installation Guide... - Page 40 ©2016 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM771027 Rev. 00...