Table of Contents
Advertisement
S
S
UPER
ERVER 5017P-TLN4F/TF User's Manual
7-7
Security Settings
•
If the Administrator password is defined ONLY - this controls access to the
BIOS setup ONLY.
•
If the User's password is defined ONLY - this password will need to be entered
during each system startup or boot, and will also have Administrator rights in
the setup.
•
Passwords must be at least 3 and up to 20 characters long.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
User Password:
Press Enter to create a new, or change an existing User password.
HDD Password:
Select Enable to activate Hard Disk Drive password support. The options are
Enabled and Disabled.
7-28
Advertisement
Table of Contents
