Table of Contents
Advertisement
S
S
UPER
ERVER 5017P-TLN4F/TF User's Manual
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the
VGA port) have two LEDs. On each
port, the yellow LED flashes to indi-
cate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table
on the right for the functions associ-
ated with the connection speed LED.
Standby Power LED (LED1)
An Onboard Power LED is located
at LED1 on the motherboard. When
LED1 is on, the AC power cable is
connected and the power supply hard
switch is on. The system may be on
standby or running.
IPMI Heartbeat LED (LED2)
An IPMI Heartbeat LED is located at
LED2. When LED2 blinks, it means
that IPMI is enabled and function-
ing properly. For the X9SPV-F and
X9SPV-LN4F only.
Overheat / Fan Fail (LED3)
LED3 is located next to the VGA port.
This indicator alerts of either a Fan
Failure, or System Overheat.
(Connection Speed Indicator)
LED Color
Off
Green
Amber
Onboard PWR LED (LED1)
Status
Off
On
IPMI Heartbeat LED (LED2)
Status
Green: Blinking
Off
OH/Fan Fail LED Indicator (LED3)
Status
Yellow: Blinking with
continuous beep
Yellow: Solid with
continuous beep
Off
5-16
LAN1/2 LED
Definition
NC or 10 Mbps
100 Mbps
1 Gbps
LED Status
Definition
System Off (Soft Switch)
Power is Detected
LED Settings
Definition
IPMI is ready for use
IPMI Disabled
LED Settings
Definition
Fan Failure
System Overheat
Normal
Advertisement
Table of Contents
