Table of Contents
Advertisement
DOM Power Connector
A power connector for SATA DOM
(Disk On Module) devices is located at
JSD1. Connect an appropriate cable
here to provide power support for your
DOM devices.
Power Supply SMBus I
The power System Management Bus
header at JPI
C2 is used to monitor
2
the status of the power supply, fan and
system temperature. See the table on
the right for pin definitions.
IPMB
A System Management Bus header for
IPMI 2.0 is located at IPMB. Connect
the appropriate cable here to use the
IPMB I
C connection on your system.
2
Chapter 5: Advanced Motherboard Setup
C Header
2
5-13
DOM PWR
Pin Definitions
Pin#
Definition
1
+5V
2
Ground
3
Ground
PWR SMB
Pin Definitions
Pin#
Definition
1
Clock
2
Data
3
PWR Fail
4
Ground
5
+3.3V
IPMB Header
Pin Definitions
Pin#
Definition
1
Data
2
Ground
3
Clock
4
No Connection
Advertisement
Table of Contents
