Pre-Assembly Check - Clarke Woodworker CS4-6C Operation & Maintenance Instructions Manual

PRE-ASSEMBLY CHECK

Separate all parts from packing materials and check each item with the "Table of
Loose Parts." Make certain all items are accounted for, before discarding any packing
material.
WARNING: If any parts are missing, do not attempt to assemble the Belt and Disc
Sander, plug in the mains lead, or switch until the missing parts are obtained and
Installed correctly.
WARNING: For your own safety, never connect plug to power source until all assembly
steps are complete and until you have read and understood the entire owners manual.
ItemDescription
A Belt and Disc Sander Assembly
B Owner's Manual
C Table
D Sanding Disc
E Table Support
F Disc Guard
G Work Stop
HMitre Gauge
Should any of the components be missing or damaged then please contact your
CLARKE dealer immediately for a replacement.
The use of any accessory/attachment, other than those
WARNING:
recommended in this instruction manual, may present a risk of
personal injury.
LOOSE PARTS
TABLE OF LOOSE PARTS
Qty. ItemDescription
1 I Bag contents
1
1
I
1
1
1
1
7
Knob
Washer, 6.5 x 17.8 x 1.6
Screw, Pan Hd. M4.
Switch Key
Lockwasher, Ext. M6
Scale Label
Screw, Hex Hd. M6
Hex "L" Wrench 6mm
Qty.
1
5
2
1
4
1
4
1